SABIC® LDPE

Density 919 kg/m3, MFR (2.16 kg) 22 g/10 min SABIC® LDPE 1922N0 is an additive free LDPE grade produced by SABIC􀂶s CTR® tubular technology. This grade is typically used for food contact applications that require high product quality, consistency and high level of purity. SABIC will offer for SABIC® LDPE 1922N0 the full food compliance service package. Application SABIC® LDPE 1922N0 is typically suitable for applications that require a good balance between flow properties and mechanical properties. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 919 kg/m3, MFR (2.16 kg) 65 g/10 min SABIC® LDPE 1965N0 is an additive free standard CTR® tubular grade with a high flow rate for masterbatch. This grade has a high filler acceptance. Application SABIC® LDPE 1965N0 is a masterbatch grade typically for injection moulding applications, where high filler acceptance and good flow properties are required. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 921 kg/m3, MFR (2.16 kg) 4.6 g/10 min SABIC® LDPE 2004CX3 is an Ultra Melt Strength (UMS) grade typically used in foam applications. Application SABIC® LDPE 2004CX3 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 920 kg/m3, MFR (2.16 kg) 5 g/10 min SABIC® LDPE 2005EC is the first commercially proven tubular LDPE grade for extrusion coating. The product gives a good combination of processing and end-performance properties. SABIC® LDPE 2005EC can be used on low and (very) high line speed extrusion coating and lamination processes. Due to its excellent draw down performance and good adhesion, very thin coating layers can be applied on the substrate. Application SABIC® LDPE2005EC is typically used in extrusion coating and lamination applications, such as liquid packaging, food packaging and building & construction. Typical substrates for coating or lamination are paper, board, aluminum, PET or PA. Properties Mechanical properties determined on compression moulded specimen (2 mm thick) at test speed of 50 mm/min. Film properties have been measured at film of 25 µm, produced on lab scale equipment. Water vapour permeability at 38 °C and 90 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 920 kg/m3, MFR (2.16 kg) 7.5 g/10 min SABIC® LDPE 2008N0 is a LDPE tubular grade without additives. SABIC® LDPE 2008N0 is produced using SABIC Clean Tubular Reactor (CTR) Technology with typically high purity. Application SABIC® LDPE 2008N0 is typically suitable as carrier resin for masterbatch and compounding applications. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 920 kg/m3, MFR (2.16 kg) 15 g/10 min SABIC® LDPE 2015N0 is an additive free standard CTR® tubular grade for masterbatch with a high purity and a medium viscosity. Application SABIC® LDPE 2015N0 is typically suitable for masterbatches in film applications with a very high loading of carbon black, titanium dioxide or pigment loading. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 921 kg/m3, MFR (2.16 kg) 0.33 g/10 min SABIC® LDPE 2100N0 is a grade with very good toughness and biaxial shrink properties. The material contains no additives, has a very low energy consumption during processing and has good draw down ability. Application SABIC® LDPE 2100N0 is a heavy duty film grade typically used for applications like shrink hoods, industrial sacks, carrier bags and liners. Film properties Film properties have been measured at 50 μm films with a BUR of 3. Films have been produced on Kiefel IBC film blown line at 200 kg/h. Die size 200 mm, die gap of 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 921 kg/m3, MFR (2.16 kg) 0.33 g/10 min SABIC® LDPE 2100N0W is a grade with very good toughness and biaxial shrink properties. The material contains no additives, has a very low energy consumption during processing and has good draw down ability. Application SABIC® LDPE 2100N0W is a heavy duty film grade typically used for applications like shrink hoods, industrial sacks, carrier bags and liners. SABIC® LDPE 2100N0W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at 50 μm films with a BUR of 3. Films have been produced on Kiefel IBC film blown line at 200 kg/h. Die size 200 mm, die gap of 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 921 kg/m3, MFR (2.16 kg) 0.85 g/10 min SABIC® LDPE 2101N0W is a grade with good toughness and biaxial shrink properties. The material contains no additives, has a low energy consumption during processing and a good draw down ability. Application SABIC® LDPE 2101N0W is typically used for thin shrink film. SABIC® LDPE 2101N0W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at 50 μm film with a BUR of 3. The film has been produced on Kiefel IBC film blown line at 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 921 kg/m3, MFR (2.16 kg) 2.5 g/10 min SABIC® LDPE 2102N0W is a general purpose grade without additives. This grade offers a high output and a very good draw down. Application SABIC® LDPE 2102N0W is typically used for general purpose film applications and for lamination film. SABIC® LDPE 2102N0W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 25 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 921 kg/m3, MFR (2.16 kg) 2.5 g/10 min SABIC® LDPE 2102N3W is a general purpose grade with a high level of anti block and slip agent. This grade offers good optical properties and a very good draw down ability. Application SABIC® LDPE 2102N3W is typically used for packaging films for food and industrial goods and for lamination films. This grade is typically used when high draw down is required The usual melt-2 film thickness can be reduced by 10-40%, maintaining an adequate CoF level. SABIC® LDPE 2102N3W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 25 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 921 kg/m3, MFR (2.16 kg) 1.9 g/10 min SABIC® LDPE 2102X0 is a grade typically used in foam applications. Application SABIC® LDPE 2102X0 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 921 kg/m3, MFR (2.16 kg) 2.5 g/10 min SABIC® LDPE 2102X3 is an Ultra Melt Strength (UMS) grade typically used in foam applications. Application SABIC® LDPE 2102X3 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR (2.16 kg) 0.33 g/10 min SABIC® LDPE 2200H0 is a grade with a low melt flow range and contains no additives. This grade has a good draw down ability and very good optical properties. Application SABIC® LDPE 2200H0 is typically used for thin film applications combining high strength and good optical properties. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR (2.16 kg) 0.33 g/10 min SABIC® LDPE 2200H2 is a grade with a low melt flow rate and contains a low level of anti block and a medium level of slip agent. This grade shows a good draw down ability and good optical properties. Application SABIC® LDPE 2200H2 is typically used for thin film applications requiring high strength and thin shrink film with high shrink forces and wrapping strength. Typical applications are lamination and coextruded films. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR (2.16 kg) 0.85 g/10 min SABIC® LDPE 2201H0 is a grade without additives with a very good draw down ability. Films based on 2201H0 combine toughness with high tear strength and very good optical properties. Application SABIC® LDPE 2201H0 is typically used for thin packaging film purposes, where good optical properties are required. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR (2.16 kg) 0.85 g/10 min SABIC® LDPE 2201H0W is a grade without additives with a very good draw down ability. Films based on 2201H0W combine toughness with high tear strength and very good optical properties. Application SABIC® LDPE 2201H0W is typically used for thin packaging film purposes, where good optical properties are required. SABIC® LDPE 2201H0W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR (2.16 kg) 0.85 g/10 min SABIC® LDPE 2201H1 is a grade with a low level of anti block and a medium level of slip agent. The grade has a very good draw down ability. Films based on 2201H1 combine toughness with high tear strength, good optical properties and low CoF. Application SABIC® LDPE 2201H1 is typically developed for lamination films, high quality carrier bags and high quality packaging films. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR (2.16 kg) 0.85 g/10 min SABIC® LDPE 2201H1W is a grade with a low level of anti block and a medium level of slip agent. The grade has a very good draw down ability. Films based on 2201H1W combine toughness with high tear strength, good optical properties and low CoF. Application SABIC® LDPE 2201H1W is typically used for lamination films, high quality carrier bags and high quality packaging films. SABIC® LDPE 2201H1W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR (2.16 kg) 0.85 g/10 min SABIC® LDPE 2201H3W is a grade anti block and slip agent. The grade has very good draw down ability. Films based on 2201H3W combine toughness with high tear strength, good optical properties and low CoF. Application SABIC® LDPE 2201H3W is typically used for thin packaging film purposes, where good optical properties are required. SABIC® LDPE 2201H3W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR (2.16 kg) 0.85 g/10 min SABIC® LDPE 2201S4 is a grade with a high amount of anti block and a low amount of slip agent. The grade contains anti oxidant. The grade shows good optical properties. Application SABIC® LDPE 2201S4 is typically used for applications where stabilisation is required during extrusion, storage and usage. Films from this grade show low reblocking values. Film properties Film properties have been measured at film of 50 μm with a BUR = 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR (2.16 kg) 1.9 g/10 min SABIC® LDPE 2202U0 is an Ultra Melt Strength (UMS) grade typically used in foam applications. Application SABIC® LDPE 2202U0 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 924 kg/m3, MFR (2.16 kg) 7.5 g/10 min SABIC® LDPE 2308N0 is a LDPE tubular grade without additives. SABIC® LDPE 2308N0 is produced using SABIC Clean Tubular Reactor (CTR) Technology with typically high purity. Application SABIC® LDPE 2308N0 is typically suitable as carrier resin for masterbatch and compounding applications. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 924 kg/m3, MFR (2.16 kg) 2 g/10 min SABIC® LDPE 2402CX0 is a grade typically used in foam applications. Application SABIC® LDPE 2402CX0 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 924 kg/m3, MFR (2.16 kg) 2 g/10 min SABIC® LDPE 2402H0 is a blown film grade which has a very broad processing window and an excellent draw down ability. The films are characterized by very good mechanical and optical properties. The grade contains no additives. Application SABIC® LDPE 2402H0 is typically used for thin film applications where enhanced stiffness is required, such as thin shrink films, food packaging films, bags and pouches. Film properties Film properties have been measured at film of 25 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 924 kg/m3, MFR (2.16 kg) 2.5 g/10 min SABIC® LDPE 2402H3W is a high gloss, general purpose grade with a high level of anti block and slip agent. This grade offers good optical properties and a very good draw down ability. Application SABIC® LDPE 2402H3W is typically used for thin high gloss films used for automatic packaging purposes. Due to very low migration levels, SABIC® LDPE 2402H3W can also be used for food applications. Film properties Film properties have been measured at film of 25 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 924 kg/m3, MFR (2.16 kg) 3.5 g/10 min SABIC® LDPE 2404EC is a tubular LDPE grade for extrusion coating. Its special molecular structure gives a good combination of processing and end-performance properties. SABIC® LDPE 2404EC can be used on low and (very) high line speed extrusion coating and lamination processes. Due to its excellent draw down performance and good adhesion, very thin coating layers can be applied on the substrate. Application SABIC® LDPE2404EC is typically used in extrusion coating and lamination applications, such as liquid packaging, imaging, food packaging, release liners and building & construction. It can be used for coatng on paper board, aluminium foil and other substrates. Due its relative high density (compared to SABIC LDPE 2005EC) it has a higher temperature resistance. Properties Mechanical properties determined on compression moulded specimen (2 mm thick) at test speed of 50 mm/min. Film properties have been measured at film of 25 µm, produced on lab scale equipment. Water vapour permeability at 38 °C and 90 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 925 kg/m3, MFR (2.16 kg) 4.7 g/10 min SABIC® LDPE 2404H4 is a grade with a high level of anti block and slip agent. The grade has a very good draw down ability. Typically films produced from this grade are stiff, have very good optical properties, low CoF and no blocking. Application SABIC® LDPE 2404H4 is typically used for stiffer thin films for textile packaging. Film properties Film properties have been measured at film of 25 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 924 kg/m3, MFR (2.16 kg) 4.2 g/10 min SABIC® LDPE 2404N0 is a LDPE tubular grade without additives.The product is typically developed for cast film extrusion applications requiring an optimal relationship between draw down, purity and organoleptic properties. Application SABIC® LDPE 2404N0 is typically suitable for a wide variety of cast film application. Properties Mechanical properties have been determined on compression moulded test specimen (1,1 mm thick and 5,0 mm wide) at 50 mm/min. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 925 kg/m3, MFR (2.16 kg) 0.4 g/10 min SABIC® LDPE 2500N0 is a grade without additives with very good shrink properties, stiffness and good bundle force. The grade has a good draw down ability. Application SABIC® LDPE 2500N0 is typically used for application in shrinkhoods, industrial sacks, heavy duty bags and liners. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 925 kg/m3, MFR (2.16 kg) 0.75 g/10 min SABIC® LDPE 2501N0 is a grade without additives with a low gel level, which combines good draw down ability with fair optical properties and stiffness. Application SABIC® LDPE 2501N0 is typically used in diaper film, surface protection film, lamination film and in applications where low blocking behavior is required and the presence of slip and anti block is unwanted. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 925 kg/m3, MFR (2.16 kg) 0.75 g/10 min SABIC® LDPE 2501N0W is a grade without additives with a low gel level, which combines good draw down ability with fair optical properties and stiffness. Application SABIC® LDPE 2501N0W is typically used in diaper film, surface protection film, lamination film and in applications where low blocking behavior is required and the presence of slip and anti block is unwanted. SABIC® LDPE 2501N0W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 926 kg/m3, MFR (2.16 kg) 0.33 g/10 min SABIC® LDPE 2600H0 is a grade with a low MFR and increased density. The material contains no additives. The films are characterized by very good mechanical properties. Application SABIC® LDPE 2600H0 is, due to its good thin film processability, typically used for technical applications like shrink film for mineral water packaging. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 926 kg/m3, MFR (2.16 kg) 0.65 g/10 min SABIC® LDPE 2601X1 is an Ultra Melt Strength (UMS) grade typically used in foam applications. Application SABIC® LDPE 2601X1 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 926 kg/m3, MFR (2.16 kg) 1.9 g/10 min SABIC® LDPE 2602H0W is a grade with very good optical properties. The grade contains no additives, has an increased density and shows a good draw down ability. The films are characterized by good mechanical properties. Application SABIC® LDPE 2602H0W is typically used for applications where enhanced stiffness is required. SABIC® LDPE 2602H0W can typically be used for food applications due to very low migration levels. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 926 kg/m3, MFR (2.16 kg) 1.5 g/10 min SABIC® LDPE 2602X1 is an Ultra Melt Strength (UMS) grade typically used in foam applications. Application SABIC® LDPE 2602X1 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 928 kg/m3, MFR (2.16 kg) 0.55 g/10 min SABIC® LDPE 2801H0W offers high production output with very good optical properties, as well as good stiffness toughness balance. Application SABIC® LDPE 2801H0W is typically used for high clarity collation shrink films, glossy automatic packaging printed films and deep freeze films. SABIC® LDPE 2801H0W can typically be used for food applications due to very low migration levels. Film properties Film properties have been measured at 30 μm film with a BUR of 3. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR(2.16 kg) 0.33 g/10 min HP0322N is a Low Density Polyethylene grade suitable for producing heavy-duty films and does not contain slip and antiblock additives. It gives outstanding toughness and optical properties in the film. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR(2.16 kg) 0.33 g/10 min HP0322NN is a Low Density Polyethylene grade suitable for producing heavy-duty films and does not contain slip, antiblock and antioxidant additives. It gives outstanding toughness and optical properties in the film. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 0.30 g/10 min HP0323NN is a Low Density Polyethylene grade suitable for producing heavy-duty films. It gives outstanding toughness and optical properties in the film. It contains no slip, no antiblock and no antioxidant additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR(2.16 kg) 0.75 g/10 min HP0722NN is an additive free low density polyethylene grade suitable for producing medium duty films. It gives good toughness and optical properties in the film. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 0.80 g/10 min HP0823JN is a Low Density Polyethylene grade formulated with slip and antiblock additives. It typically exhibits good melt strength with good draw down ability. Films typically exhibit good toughness and good biaxial shrink properties AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 0.80 g/10 min HP0823NN is a Low Density Polyethylene grade formulated with no slip and no antiblock and no antioxidant additives. It typically exhibits good melt strength with good draw down ability. Films typically exhibit good toughness and good biaxial shrink properties AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 924 kg/m3, MFR(2.16 kg) 0.8 dg/min- for Foam Extrusion SABIC® LDPE HP0824NDF is a grade typically used in foam applications. It is with slip and anti-block additives. This grades is ideally suitable for crosslink- and non-crosslink foaming processes using both physical and chemical blowing agents. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 930 kg/m3, MFR(2.16 kg) 0.80 g/10 min SABIC® HP0830N is Low Density Polyethylene grade of medium density with improved stiffness and excellent optical properties. It typically exhibits good melt strength with good draw down ability. Films typically exhibit good toughness and good biaxial shrink properties. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 15 g/10 min HP15023 is an additive free low density polyethylene grade with high melt flow, offering good processability and capability to accept high pigment loading during compounding. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 20 g/10 min HP20023 is an additive free low density polyethylene grade with high melt flow, offering good processability and capability to accept high pigment loading during compounding. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR(2.16 kg) 2.0 g/10 min HP2022JN is a Low Density Polyethylene grade suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties. HP2022JN contains slip and antiblock additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR(2.16 kg) 2.0 g/10 min HP2022NN is a Low Density Polyethylene grade suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties. HP2022NN contains no slip, no antiblock and no antioxidant additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 2.0 g/10 min HP2023JN is a Low Density Polyethylene grade suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties. HP2023JN contains slip and antiblock additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 2.0 g/10 min HP2023NN is a Low Density Polyethylene grade suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties. HP2023NN contains no slip, no antiblock and no antioxidant additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 924 kg/m3, MFR(2.16 kg) 2 dg/min- for Foam Extrusion SABIC® LDPE HP2024JDF is a grade typically used in foam applications. It is with slip and anti-block additives. This grades is ideally suitable for crosslink- and non-crosslink foaming processes using both physical and chemical blowing agents. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 924 kg/m3, MFR(2.16 kg) 2 dg/min- for Foam Extrusion SABIC® LDPE HP2024NDF is a grade typically used in foam applications. It is without slip and anti-block additives. This grades is ideally suitable for crosslink- and non-crosslink foaming processes using both physical and chemical blowing agents. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 927 kg/m3, MFR(2.16 kg) 2.0 g/10 min HP2027LN is a Low Density Polyethylene grade with increase density. It typically exhibits better draw down ability with high output. Films typically have excellent optics and high rigidity. It contains slip and antiblock additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 927 kg/m3, MFR(2.16 kg) 2.0 g/10 min HP2027NN is a Low Density Polyethylene grade with increase density. It typically exhibits better draw down ability with high output. Films typically have excellent optics and high rigidity. It contains no slip, no antiblock and no antioxidant additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 4.0 g/10 min HP4023WN is an antioxidant free low density polyethylene grade suitable for producing general-purpose films. It contains slip and antiblock additives. It gives excellent processability and optical properties with good mechanical properties. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 4.0 g/10 min HP4024N is a Low Density Polyethylene grade suitable for producing general-purpose films and it gives excellent processability and optical properties with good mechanical properties. HP4024WN contains no slip and no antiblock additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 4.0 g/10 min HP4024WN is a Low Density Polyethylene grade suitable for producing general-purpose films and it gives excellent processability and optical properties with good mechanical properties. HP4024WN contains slip and antiblock additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 4.0 g/10 min HP4024ZN is a Low Density Polyethylene grade suitable for producing general-purpose films and it gives excellent processability and optical properties with good mechanical properties. HP4024ZN contains high level of slip and antiblock additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 927 kg/m3, MFR(2.16 kg) 4.0 g/10 min HP4027JN is a Low Density Polyethylene grade with increase density. It typically exhibits better draw down ability with high output. Films typically have excellent optics and high rigidity. HP4027JN contains slip and antiblock additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 927 kg/m3, MFR(2.16 kg) 4.0 g/10 min HP4027NN is a Low Density Polyethylene grade with increase density. It typically exhibits better draw down ability with high output. Films typically have excellent optics and high rigidity. HP4027NN contains no slip, no antiblock and no antioxidant additives. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR(2.16 kg) 7.0 g/10 min for Injection Molding HP7022 is a free additive low density polyethylene offering a unique combination of consistent processability, flexibility and toughness. Articles manufactured from HP7022 exhibits excellent impact strength, low shrinkage and good gloss. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923 kg/m3, MFR(2.16 kg) 7.0 g/10 min for Injection Molding HP7023 is a Low Density Polyethylene grade that offers a unique combination of consistent processability, flexibility and toughness. Articles manufactured from HP7023 exhibits excellent impact strength, low shrinkage and good gloss. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 923kg/m3, MFR(2.16 kg) 2.0 g/10 min P223 is a natural low density polyethylene (LDPE) resin, designed for non-pressure pipe extrusion application. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 925 kg/m3, MFR(2.16 kg) 0.4 g/10 min SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG00 is an additive-free grade produced using SABIC’s proprietary high pressure Clean Tubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG00 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 925 kg/m3, MFR(2.16 kg) 0.75 g/10 min SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG01 is an additive-free grade produced using SABIC’s proprietary high pressure Clean Tubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG01 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 921 kg/m3, MFR(2.16 kg) 1.9 g/10 min SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG02 is an additive-free grade produced using SABIC's proprietary high pressure CleanTubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG02 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 928 kg/m3, MFR(2.16 kg) 0.55 g/10 min SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG06 is an additive-free grade with high purity and very low migration levels. It is typically used for semi-rigid IV containers for Large Volume Parenterals (LVP) obtained by Blow Fill Seal (BFS) process. Compliance to Regulations SABIC® LDPE PCG06 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 920 kg/m3, MFR(2.16 kg) 7.5 g/10 min SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG07 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures and secondary packaging. Compliance to Regulations SABIC® LDPE PCG07 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 924 kg/m3, MFR(2.16 kg) 7.5 g/10 min SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG09 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures, small bottles and secondary packaging. Compliance to Regulations SABIC® LDPE PCG09 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 919 kg/m3, MFR(2.16 kg) 22 g/10 min SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG22 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding to produce caps and closures. It exhibits a high MFR for good flow properties. Compliance to Regulations SABIC® LDPE PCG22 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 922 kg/m3, MFR(2.16 kg) 0.33 g/10 min SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG80 is an additive-free grade produced using SABIC􀂶s proprietary high pressure Clean Tubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG80 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). AmericasAsiaEuropeGreater ChinaMiddle East and Africa