SABIC® PP

MFR(2.16 kg) 10 g/10 min SABIC® PP 107M90T is a medium fluidity polypropylene impact copolymer with super high impact strength. It contains antistatic agents. Asia

MFR (2.16 kg) 10 g/10 min SABIC® PP 108MF10 is a super high impact copolymer which exhibits an unmatched cold impact resistance, high flow and excellent paint adhesion characteristics. Because of this unique and well balanced property profile our customers commonly use this material for painted car bumpers. SABIC® PP 108MF10 is a designated automotive grade. IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 10 g/10 min SABIC® PP 108MF97 is a super high impact copolymer which exhibits an unmatched cold impact resistance, high flow and excellent paint adhesion characteristics. It is very resistant to UV. Because of this unique and well balanced property profile our customers commonly use this material for partially and non-painted car bumpers. SABIC® PP 108MF97 is a designated automotive grade. IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 30 g/10 min SABIC® PP 311MK40T is a high fluidity polypropylene impact copolymer with very high stiffness. It contains nucleating & antistatic agents. Asia

MFR(2.16 kg) 45 g/10 min SABIC® PP 412MK49 is specially developed for producing injection molded articles. This grade contains nucleating and antistatic agents. It has high flow properties and excellent impact – stiffness balance. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 37 g/10 min SABIC® PP 412MN40 is a multi-purpose grade with good flow properties, combining stiffness and good balance in impact strength. The material has a very low tendency for warpage and is typically used for the production of thin wall packaging articles. Cycle times can be very short. It is formulated with a combined processing and antistatic additive package. This grade is widely applied in thin wall technical injection moulded articles and thin-walled containers, in particular where dimensional stability is important. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 70 g/10 min SABIC® PP 413MNK45 is a controlled rheology PP grade with a very high fluidity. It is provided with an antistatic and nucleating agent package. This grade has a good impact – stiffness balance. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 15 g/10 min SABIC® PP 48M10 has good flow characteristics, high stiffness and good impact strength. It is typically used for articles with complex shapes, such as crates and boxes, rigid packaging and components for the automotive and electro-technical industries. This grade is also available with an antistatic additive package, namely SABIC® PP 48M40. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 15 g/10 min SABIC® PP 48M40, a multi-purpose grade, has good flow characteristics, high stiffness and good impact strength. It is formulated with a combined processing and antistatic additive package. It is typically used for articles with complex shapes, such as crates and boxes, rigid packaging and components for the automotive and electro-technical industries. This grade is also available without an antistatic additive package, namely SABIC® PP 48M10. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 16 g/10 min SABIC® PP 48MK40 is specially developed for producing injection molded articles. This grade contains nucleating and antistatic agents. It has medium flow properties, good impact resistance (even at low temperature) and balanced stiffness. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 0.3 g/10 min SABIC® PP 4935 is a random copolymer with a very high molecular weight. This grade has a special stabilization package. The stabilization and particular molecular structure make it suited for use in extremely demanding applications like coolant expansion vessels in cars. The grade can be processed by injection molding. The material has a medium impact, is semi-transparent and has a good stress-whitening (low blushing) characteristic.IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 21 g/10 min SABIC® PP 49MK45 is specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has medium flow properties and excellent impact - stiffness balance. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 3 g/10 min SABIC® PP 500P is a medium flow, multipurpose grade for extrusion and injection molding applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 0.8 g/10 min SABIC® PP 501P is a multi purpose grade for extrusion applications.Application:SABIC® PP 501P is suitable for extrusion of tapes and strapping.Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comIMDS ID: 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 3.2 g/10 min SABIC® PP 504P is specially developed for producing stretched tapes with the following features: Consistent processability; Easy orientation; Low water carry over; Good mechanical properties. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 3.2 g/10 min SABIC® PP 504PT is a low fluidity polypropylene homopolymer with consistent processability, easy orientation, low water carry over and good mechanical properties. Asia

MFR (2.16 kg) 2.0 g/10 min SABIC® PP 505P is a low mfi grade typically used in extrusion applications like sheet and thermoforming. Application:SABIC® PP 505P is typically used in dairy, flower pots, yellow fats and disposables plates and cups. However, customers use this grade also in combination with fillers like Talc and CaCO3. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com This grade material is UL registered under File E111275 (www.ul.com) AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 4.8 g/10 min SABIC® PP 506P is intended for producing low denier stretched tapes with the following features: Consistent processability; Good process ability at high line speeds and low deniers; Low tapes shrinkage; Low water carry over; Very good mechanical properties. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 10.5 g/10 min SABIC® PP 510A is a fibre grade with an anti gas fading stabilisation package. SABIC® PP 510A is suitable for e.g. wipes and industrial carpets but also for geotextiles with a moderate tenacity.Application:SABIC® PP 510A is suitable for spinning of coarse staple fibres (both short and long spin), carpet fibres and yarns. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThe product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.This grade material is UL registered under File E111275 (www.ul.com)IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 12 g/10 min SABIC® PP 510P is a fibre grade with an anti gas fading stabilisation package.This grade is suitable for e.g. wipes and industrial carpets. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 25 g/10 min SABIC® PP 511A is a polypropylene homopolymer resin specifically designed for extrusion applications like spun bond and continuous filament spinning resulting in excellent non woven tensile properties.The narrow molecular weight distribution of SABIC® PP 511A is obtained by balanced controlled rheology. SABIC® PP 511A is compatible with all existing spun bond/continuous filament machine technologies producing different non woven compositions, produced with narrow distributed molecular weight polypropylene resins. SABIC® PP 511A has a special developed anti gas fading formulation to minimise discolouration of the fibers. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 29g/10 min SABIC® PP 511MK10T is a high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating agents. Asia

MFR(2.16 kg) 29 g/10 min SABIC® PP 511MK40T is a high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating & antistatic agents. Asia

MFR (2.16 kg) 30 g/10 min SABIC® PP 511MK46 is specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has medium-high flow properties in combination with excellent impact / stiffness balance and excellent organoleptic properties. SABIC® PP 511MK46 encompasses the following features: excellent top load strength & down gauging potential; excellent impact resistance; excellent isotropic shrinkage performance (dimensional stability); high crystallization temperature and excellent flow behavior (lower cycle time); clean product in combination of low / no odor & taste. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 29 g/10 min SABIC® PP 511MNK40T is a high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating & antistatic agents. Asia

MFR(2.16 kg) 25 g/10 min SABIC® PP 512A is a controlled rheology grade with narrow molecular weight distribution intended for general purpose applications such as woven sacks lamination and injection molding. SABIC® PP 512A has the following features: Consistent processability; Good thread line stability; Good color consistency; Good gas fading resistance. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 40 g/10 min SABIC® PP 512MK40T is a high fluidity polypropylene impact copolymer with good processability, high stiffness and medium impact strength. It contains nucleating & antistatic agents. Asia

MFR (230°C & 2.16 kg) 50 g/10 min SABIC® PP 512MK46 is specially developed for producing injection molded articles. This grade contains nucleating and antistatic agents. It has high flow properties in combination with excellent impact / stiffness balance and excellent organoleptic properties. SABIC® PP 512MK46 encompasses the following features: High top load strength & down gauging potential; Very good impact resistance; Excellent isotropic shrinkage performance (dimensional stability); High crystallization temperature and excellent flow behavior (lower cycle time); Clean product in combination of low / no odor & taste. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 37 g/10 min SABIC® PP 512MN10 has excellent flow properties and a good combination of high impact strength and stiffness. It is widely used in articles where good processability, high toughness and a low warpage are required, e.g. vacuum-cleaner housings, large size flower pots, foodstuff containers and ice-cream containers. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 5.8 g/10 min SABIC® PP 513A is a fibre grade with an anti gas fading stabiliser package.Application:SABIC® PP 513A is suitable for extrusion of staple fibres used in geo-textile applications with an optimum balance of tenacity/elongation.Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThe product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.This grade material is UL registered under File E111275 (www.ul.com)IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

Density 902 kg/m3, MFR(2.16 kg) 70 g/10 min SABIC® PP 513MK46 is specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has very high flow properties in combination with excellent impact / stiffness balance and excellent organoleptic properties. SABIC® PP 513MK46 encompasses the following features: High top load strength & down gauging potential Very good Impact resistance Excellent isotropy shrinkage performance (dimensional stability) High crystallization temperature and superior flow behavior (lower cycle time) Easy mold filing for aesthetic & large items Clean product in combination of low / no odor & taste AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 70 g/10 min SABIC® PP 513MN40 is a controlled rheology PP grade with very high fluidity. It contains an antistatic agent and especially developed for producing injection molded articles. This grade has a good impact resistance even at low temperature. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 60 g/10 min SABIC® PP 513MNK40T is a very high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating & antistatic agents. Asia

MFR (2.16 kg) 24 g/10 min SABIC® PP 515A is characterized by high flow and broad molecular weight distribution. It contains an anti gas fading stabilisation package.Application: SABIC® PP 515A is suitable for (bulked) continuous filaments, including mono and tri colour carpet yarns.Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.This grade material is UL registered under File E111275 (www.ul.com)IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 4.8 g/10 min SABIC® PP 516P is a PP homopolymer grade specially designed for fiber extrusion applications with the following features: Consistent processability; Good thread line stability; Good color consistency; Good gas fading resistance. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 25 g/10 min SABIC® PP 518A is a PP homopolymer grade with broad molecular weight distribution intended for fiber extrusion applications. SABIC® PP 518A has the following features: Consistent processability; Good thread line stability; Good gas fading resistance. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 25 g/10 min SABIC® PP 518P is a PP homopolymer grade with broad molecular weight distribution intended for fiber extrusion applications. SABIC® PP 518P has the following features: Consistent processability; Good thread line stability; Good gas fading resistance. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 35 g/10 min SABIC® PP 519A is a polypropylene homopolymer resin specifically designed to enable optimised production speed of very fine filament titre resulting in an excellent balance of mechanical properties and softness. The rheological performance of SABIC® PP519A is providing the potential to optimise production efficiency especially for fibre production characterised by consistent high speed and low non wovens weights at reduced temperatures. SABIC® PP 519A has a very narrow molecular weight distribution. SABIC® PP 519A is compatible with all existing spun bond machine technologies producing different non woven compositions. SABIC® PP 519A has a special developed anti gas fading formulation to minimise discolouration of the fibers. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 10 g/10 min SABIC® PP 520L is specially developed for tubular water quenched blown film applications with suitable dosage of slip and antiblock additives. Films produced using SABIC® PP 520L has the following features: Consistent processability; High melt strength; Good optical properties; Excellent runability on bagging and sealing machines. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 10.5 g/10 min SABIC® PP 520P is particularly designed for extrusion of cast film, both mono layer films and co extruded films. It provides an excellent combination of transparency, stiffness and high heat resistance. SABIC® PP 522L is the anti block and slip agent containing version of SABIC® PP 520P.Application:SABIC® PP 520P is typically used for food packaging, lamination film, stationary film, textile packaging, flower packaging, and hygiene packaging. It offers excellent properties for twist film application. Health, Safety and Food Contact regulations: SABIC® PP 520P has a Food Contact Declaration. SABIC Material Safety Data Sheets (MSDS) and Product Safety Declarations are available on our Internet site http://www.sabic.com.The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.This grade material is UL registered under File E111275 (www.ul.com)IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 3.3 g/10 min SABIC® PP 5211P is a non-formulated grade, specially developed for bi-axially oriented PP (BOPP) film extrusion with a very specific molecular structure providing ultimate properties required for the stenter film process. Films produced using PP 5211P will exhibit: -Easy process ability, Good thickness control -Superior optical properties -High tensile properties -Low residual ash -Film produced can be metalized Middle East and Africa

MFR(2.16 kg) 3 g/10 min SABIC® PP 521P is particularly designed for (biaxially) oriented PP film extrusion with a very specific molecular structure providing the ultimate properties required for the stretching process. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 3 g/10 min SABIC® PP 522K is formulated with an advanced nucleating agent and is specially developed for in-line and off-line thermoforming applications. SABIC® PP 522K encompasses the following features: High stiffness; Very good clarity and aesthetics; Very good dimensional stability; Easy processability and faster cycling AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 3 g/10 min SABIC® PP 523P is a non-formulated grade, specially developed for bi-axially oriented PP (BOPP) film extrusion with a very specific molecular structure providing ultimate properties required for the stenter film process. SABIC® PP 523P is suitable for metalizable film, both as monolayer and in co-extruded structures. Films produced using SABIC® PP 523P will exhibit: Consistent processability; Very good film profile; Excellent optical properties; High tensile properties; Low residual ash; Film produced can be metalized. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 2.0 g/10 min SABIC® PP 524P is particularly developed for (biaxially) oriented PP film extrusion with a very specific molecular structure providing the ultimate properties required for the stretching process. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 3.0 g/10 min SABIC® PP 525P is particularly developed for (biaxially) oriented PP film extrusion with a very specific molecular structure providing the ultimate properties required for the stretching process. Application:SABIC® PP 525P is typically used in mono layer or coextruded (B)OPP film. SABIC® PP 525P is known for its excellent metallisation behaviour. Health, Safety and Food Contact regulations: SABIC® PP 525P has a Food Contact Declaration. Material Safety Data Sheets (MSDS) and Product Safety Declarations are available on our Internet site http://www.sabic.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 8 g/10 min SABIC® PP 5261N is high crystallinity, high stiffness home PP grade specially developed for cast film applications and do not contain slip and antiblock additives. Films produced using SABIC® PP 5261N will exhibit: High stiffness, Consistent processability; Good gloss and clarity; Good melt strength; Good mechanical properties, Good heat resistance, Film produced can be metallized. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 8 g/10 min SABIC® PP 526P is specially developed for cast film applications for producing clear films and do not contain slip and antiblock additives. Films produced using SABIC® PP 526P will exhibit: Consistent processability; High gloss and clarity; Good melt strength; Good mechanical properties; Film produced can be metalized. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 3.0 g/10 min SABIC® PP 527K is a leading grade typically used for products in thermoforming. Tailoring of the polymer architecture combined with effective nucleation resulted in a good balance of very high stiffness combined with excellent transparency. Its high crystallisation temperature is ideally suited for further line speed improvements. Moreover it is formulated with a combined processing and antistatic additive package. Application: SABIC® PP 527K is typically used in packaging for Fruit, Vegetables, Meat, Fish, Poultry and Ambient Food packaging. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.sabic.com. This product is not intended for and must not be used in any pharmaceutical/medical applications. IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 3 g/10 min SABIC® PP 528K is formulated with an advanced agent and is specially developed for in-line and off-line thermoforming applications. PP 528K encompasses the following features: high stiffness, good clarity, very good dimensional stability, easy process ability and faster cycling. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 0.3 g/10 min SABIC® PP 531Ph has a high molecular weight and therefore mainly used for extrusion. It is typically used for non-pressure pipes and sheet applications. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 0.3 g/10 min SABIC® PP 532Bh has a high molecular weight and therefore mainly used for extrusion. It has been provided with a high heat stabilisation package and is typically used for thick sheet in demanding applications. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.sabic.com. This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 6.2 g/10 min SABIC® PP 56M10 has high impact resistance, even at low temperatures, and high stiffness. It is typically used in a variety of applications e.g. containers and crates & boxes. It is also used in automotive components, like for example battery cases. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 7.0 g/10 min SABIC® PP 56M65 is specially developed for producing injection molded articles requiring a good resistance to long term heat exposure. This grade contains high heat stabilizer additive & has good heat aging resistance and good impact - stiffness balance. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 6 g/10 min SABIC® PP 5701P is specially developed for injection molded articles for general purpose applications. It gives consistent processability and high gloss at the products. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 9 g/10 min SABIC® PP 5702P is specially developed for injection molded articles for general purpose applications. It gives consistent process ability and high gloss at the products. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 12 g/10 min SABIC® PP 5703P is specially developed for producing rigid injection molded articles for general purpose applications. It gives consistent processability and high gloss at the products. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 24 g/10 min SABIC® PP 5707N is a PP homopolymer grade with antistatic and nucleated agents. It is suitable for producing injection molded applications with good flow properties, good dimensional stability, high stiffness and good clarity comparing to the regular PP homopolymer grades. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 8 g/10 min SABIC® PP 570P is specially developed for producing rigid injection molded articles for general purpose applications. It gives consistent processability, good mechanicals and high gloss in the products. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 5.7 g/10 min This grade has typically nice gloss and good surface hardness. Typical applications are sanitary, closures with and without integral hinges. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThe product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical / medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 11 g/10 min SABIC® PP 575P is specially developed for producing rigid injection molding articles for general purpose applications. It gives consistent processability and high gloss in the products. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 12.5 g/10 min SABIC® PP 575PT is a medium fluidity polypropylene homopolymer with consistent processability and properties. Asia

MFR (2.16 kg) 19 g/10 min SABIC® PP 576P is a PP homopolymer grade that has good flow properties and a narrow molecular weight distribution. Products made from SABIC® PP 576P typically have low warpage and a high gloss, high stiffness in combination with moderate impact strength at room temperature. Application: SABIC® PP 576P is typically used in caps & closures and thin wall packaging both in food and non-food segments. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 19 g/10 min SABIC® PP 576S is a PP homopolymer grade that has good flow properties, very good demoulding properties and a narrow molecular weight distribution. Products made from SABIC® PP 576S typically have low warpage and a high gloss, high stiffness in combination with moderate impact strength at room temperature. Application: SABIC® PP 576S is typically used in caps & closures and thin wall packaging both in food and non-food segments, and appliances. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (230°C & 2.16 kg) 70 g/10 min SABIC® PP 5770N is a PP homopolymer grade with antistatic and nucleating agents. It is suitable for producing injection molded applications with outstanding flow properties, good dimensional stability, high stiffness, excellent organoleptic properties and good clarity comparing to the regular PP homopolymer grades. SABIC® PP 5770N encompasses the following features: very high top load strength & down gauging potential; isotropy shrinkage performance (dimensional stability); high crystallization temperature and superior flow behavior (lower cycle time); easy mold filing for aesthetic & large items; clean product in combination of low / no odor & taste. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 25 g/10 min SABIC® PP 5780P is a PP homopolymer grade with narrow molecular weight distribution and formulated with slip agent. This grade is suitable for injection molding applications require good flow properties, low COF and good gloss. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 25 g/10 min SABIC® PP 578L is a PP homopolymer grade which contains a well balanced antistatic and slip agent package. This grade allows for cost efficient processing on the basis of good flow behavior, short cycle times, good demoulding and robust processing behaviour. Products made from SABIC® PP 578L typically have low warpage, high stiffness in combination with moderate impact strength at room temperature, good antistatic behavior and a high gloss. Application: SABIC® PP 578L is typically used in caps & closures and thin wall packaging both in food and non-food segments. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical / medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 25 g/10 min SABIC® PP 578N is a nucleated PP homopolymer grade. This grade allows for cost efficient processing on the basis of good flow behavior, short cycle times, and robust processing behaviour. Products made from SABIC® PP 578N typically have low warpage and a high gloss, high stiffness in combination with moderate impact strength at room temperature. Application: SABIC® PP 578N is typically used in domestic appliances and furniture. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 47 g/10 min SABIC® PP 579S is a PP grade with narrow molecular weight distribution. This grade is formulated with antistatic and nucleating agents. It is suitable for producing thin-walled injection molding articles and it gives low warpage tendency, high stiffness & outstanding flow properties for excellent part filling. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 12 g/10 min SABIC® PP 57MNK10 is a controlled rheology PP grade and specially developed for producing injection molded articles. This grade has excellent impact resistance (even at low temperature) and balanced stiffness. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 12 g/10 min SABIC® PP 57MNK40 is a controlled rheology PP grade and specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has excellent impact resistance (even at low temperature) and balanced stiffness. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 15 g/10 min This grade combines an excellent stiffnesswith high impact resistance. It has a low tendency to warp. Excellent flow in combination with high crystallisation speed enables outstanding processability aiming at easy mould filling and short cycle times. Thanks to the mentioned performance this grade is typically used in several kinds of containers. The excellent gloss level makes this material also favourable for household applications. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThis product is not intended for and must not be used in any pharmaceutical/medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 47 g/10 min SABIC® PP 595A has been specially developed for use in automotive compounding. The material has high flow properties and a high stiffness, enabling high production rates. It is formulated with a dedicated automotive additive package. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 1.7 g/10 min PP 620P is a general-purpose random PP grade primarily produced for extrusion applications. Due to its basic design, it can be used in a wide range of applications. With the well balance mechanical properties and easy extrusion behavior, it is highly useful in a wide range of applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 8.0 g/10 min SABIC®PP 621P is a newly designed random copolymer polypropylene particularly for cast film applications with high clarity. Products produced out of SABIC® PP 621P have a high clarity, excellent sealing performance and high puncture resistance. The molecular structure of this grade is tailored for high performance processing. SABIC® PP 621P does not contain anti-block and slip agent. A grade with anti-block and slip agent is available as SABIC® PP 622L. Applications: SABIC PP 621P is typically used in applications like food packaging, lamination film, stationary film, textile packaging, flower packaging, and hygiene packaging. SABIC®PP 621P is also a partner resin of LLDPE for power stretch film to which high holding force is required in order to assure good pallet stability. Specific applications are: sparkling beverage, building & construction materials and in general unitized heavy goods. SABIC®PP 621P has a good rheological matching with LLDPE which result in an easy process-ability (see graph on second page). Health, Safety and Food Contact regulations: SABIC®PP 621P has a Food Contact Declaration. Material Safety Data Sheets (MSDS) and Product Safety Declarations are available on our Internet site http://www.sabic.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 8.0 g/10 min SABIC®PP 622L is a polypropylene random copolymer resin specifically designed for cast film applications. Products produced out of SABIC®PP 622L have a high clarity, excellent sealing performance and high puncture resistance. The molecular structure of this grade is tailored for high performance processing. SABIC®PP 622L contains anti-block and slip agent for low coefficient of friction. A grade without anti-block and slip agent is available as SABIC®PP 621P. Applications: SABIC PP 622L is typically used in applications like food packaging, lamination film, stationary film, textile packaging, flower packaging, and hygiene packaging. Health, Safety and Food Contact regulations: SABIC®PP 622L is compliant to food contact regulations. Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 0.3 g/10 min SABIC® PP 642NH-66408 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) green coloured and specially designed for transport of hot and cold drinking water. This grade is highly heat stabilized and specially formulated for extraction resistance with improved throughput & gloss.SABIC®PP 642NH-66408 is pre-color compounded version of SABIC®PP 651H PPR resin (Exova – MRS classification 8 MPa). SABIC®PP 642NH-66408 is a designated pipe grade. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16kg) 2g/10min SABIC® PP 64M40T is a low fluidity polypropylene impact copolymer with high impact strength and medium stiffness. It contains antistatic agents. Asia

MFR(2.16 kg) 2.0 g/10 min SABIC® PP 64M60T is a low fluidity polypropylene impact copolymer with excellent long term heat resistance, high impact strength and medium stiffness. It contains antistatic agents. Asia

Density 897 kg/m3, MFR(2.16 kg) 0.25 g/10 min PP 651H is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) green colored & specially designed for transport of hot and cold drinking water. This grade is highly heat stabilized and specially formulated for extraction resistance with improved throughput & gloss. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 8 g/10 min SABIC®PP 6622PT is a random copolymer PP with high E-modulus and medium melting temperature. Due to its specific design, it can be used in EPP(expanded PP foam beads) application. With the well balance of E-mod and Tm, it has balance performance on mechanical property and processing economy. Asia

MFR(2.16 kg) 10 g/10 min SABIC® PP 77MK40T is a medium fluidity polypropylene impact copolymer with high impact strength and high stiffness. It contains nucleating & antistatic agents. Asia

MFR (2.16 kg) 1.2 g/10 min This grade combines a very high impact strength, even at low temperatures, with a high stiffness and low flow properties. It is typically used for extrusion of flat sheets, corrugated board and corrugated pipes. Health, Safety and Food Contact regulations: Safety Data Sheets (SDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical / medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 1.8 g/10 min This grade combines a very high impact strength, even at low temperatures, with a high stiffness and moderate flow properties. It is suitable for injection moulding of technical components and containers exposed to heavy loads and needing a high toughness. It is typically used for extrusion applications like thin sheet, corrugated board and profiles. Health, Safety and Food Contact regulations: Safety Data Sheets (SDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical / medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 3.5 g/10 min SABIC® PP 85M10T is a low fluidity polypropylene impact copolymer with good processability, very high impact strength and medium stiffness. It contains antistatic agents. Asia

MFR (2.16 kg) 4.6 g/10 min SABIC® PP 86MF97 is a grade which is characterised by an optimum combination of stiffness, impact resistance and flow. It is highly UV-stabilised, and therefore commonly used for exterior applications such as car bumpers. SABIC® PP 86MF97 is a designated automotive grade. IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 22 g/10 min SABIC® PP 90910 is a reactor-elastomer-modified material which offers a good cold impact resistance in combination with high flow. It is a highly attractive alternative to non-filled compounds and is typically used for painted car bumpers and exterior trim. SABIC® PP 90910 is a designated automotive grade. IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 6 g/10 min SABIC® PP 95610 is a reactor-elastomer-modified material which offers an excellent cold impact resistance. It is a highly attractive alternative to non-filled compounds and is commonly used for car bumpers. SABIC® PP 95610 is a designated automotive grade. IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 15 g/10 min SABIC® PP CX02-81 is a high crystalline copolymer. It offers high stiffness in perfect balance with high thermal dimensional stability, impact resistance and flow. This material has excellent aesthetic properties as well and is typically used for automotive interior applications. It is the obvious alternative to conventional talc-filled copolymers, offering considerable weight saving advantage. SABIC® PP CX02-81 is a designated automotive grade. IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 15 g/10 min SABIC® PP CX02-82 is an emission optimised high crystalline copolymer. It offers high stiffness, in perfect balance with high thermal dimensional stability, impact resistance and flow. This material has excellent aesthetic properties as well and is typically used for automotive interior applications. It is the obvious alternative to conventional talc-filled copolymers, offering considerable weight saving advantage. SABIC® PP CX02-82 is a designated automotive grade. IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 10 g/10 min SABIC® PP CX03-81 is a high crystalline copolymer. It offers high impact resistance, in perfect balance with high thermal dimensional stability, stiffness and flow.This material has excellent aesthetic properties as well and is typically used for automotive interior applications. It is the obvious alternative to conventional talc-filled copolymers, offering considerable weight saving advantage. SABIC® PP CX03-81 is a designated automotive grade. IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 10 g/10 min SABIC® PP CX03-82 is an emission optimised high crystalline copolymer. It offers high impact resistance, in perfect balance with high thermal dimensional stability, stiffness and flow. This for automotive interior applications UV-stabilised material has excellent aesthetic properties as well. It is the obvious alternative to connventional talc-filled copolymers, offering considerable weight saving advantage. SABIC® PP CX03-82 is a designated automotive grade. IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 100 g/10 min SABIC® PP FPC100 has been developed as a new member of the SABIC® PP FLOWPACT range dedicated to the thin wall packaging market. It is nucleated and is characterized by a high crystallization temperature and excellent flow behaviour in combination with a nice stiffness to impact balance. This grade is typically used for high-speed injection moulding and it enables very cost efficient processing on the basis of easy mould filling and very short cycle times. It has a very good antistatic performance and permitseasy demoulding.This material is typically used in thin wall packing applications both for food and non-food segments. This includes yellow fats/margarine tubs, dairy packaging and housewares. The grade has an excellent dimensional stability what is crucial for the thin wall packaging market. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThe product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 45 g/10 min This grade has been developed as a new member of the SABIC® PP FLOWPACT range dedicated to the rigid packaging market. It delivers a high top load performance (potential downgauging) with a superior stiffness / impact balance. It is nucleated and is characterized by a high crystallization temperature and excellent flow behavior. This grade was designed for high-speed injection moulding and it enables very cost efficient processing on the basis of easy mould filling and very short cycle times. It has a very good antistatic performance with easy demoulding.Application: This material is typically used in rigid packaging applications for both food and non-food industries. This includes packaging for yellow fats, cheese spreads, dairy, frozen, chilled and ambient food, household chemicals, paints among others. It can be also used in several applications in the caps & closures industry as well in housewares. The grade has excellent heat deflection temperature making it particularly suitable for hot fill applications.Health, Safety and Food Contact regulation: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC-com. -The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 70 g/10 min As part of SABIC® PP FLOWPACT portfolio, FPC70 delivers high top load performance (potential downgauging) with a superior stiffness / impact balance. It is nucleated and has good antistatic performance with easy demoulding. This grade has good flow behavior, and it was designed for high-speed injection moulding process, potentially enabling very cost efficient processing on the basis of easy mould filling and very short cycle times. Applications: SABIC® PP FPC70 is typically used in rigid packaging applications for both food and non-food industries. This includes packaging for yellow fats, cheese spreads, dairy, frozen, chilled and ambient food, household chemicals and paints among others. It can be also used in several applications in the caps & closures as well in housewares. The grade has excellent heat deflection temperature making it particularly suitable for hot fill applications. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com This product is not intended for and must not be used in any pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 50 g/10 min SABIC® PP FPH50 is a grade developed for thin wall packaging as well as the caps & closures market. The grade is nucleated and is characterised by a high crystallisation temperature, excellent flow behaviour in combination with a high stiffness. SABIC® PP FPH50 allows for very cost efficient processing on the basis of easy mould filling, very shortcycle times and robust processing behaviour in combination with pigments. It has a very good antistatic performance and shows easy demoulding. Application: SABIC® PP FPH50 is typically used in thin wall packing applications both for food and non-food segments. In caps and closure, the grade could be used for wide mouth caps, amongst others. In media packaging, the grade offers opportunities for cycle time optimisation. The grade has excellent heat deflection temperature making it particularly suitable for hot fill applications. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.sabic.com. This product is not intended for and must not be used in any pharmaceutical/medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 19 g/10 min SABIC® PP grades for healthcare applicationsare produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® PP PCGH19 is typically designed for injection molding of healthcare applications such as caps and closures, 3-part syringes and other thin walled parts. This grade offers a high stifness combined with good flow properties. Due to its narrow molecular weight distribution it is typically very suitable for thin walled, warpage critical applications. Compliance to regulations: SABIC® PP PCGH19 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body. IMDS 7172624 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 1.8g/10 min SABIC® PP PCGR02T is a low fluidity polypropylene random copolymer for medical application with reliable safety and good processability. It is specially developed for Blow Fill Seal (BFS) process. Asia

MFR(2.16 kg) 8 g/10 min SABIC® PP PCGR08T is a medium fluidity polypropylene random copolymer for medical application with reliable safety and good processability. It is specially developed for Injection Stretch Blow Molding (ISBM) process. Asia

MFR (2.16 kg) 25 g/10 min SABIC® PP grades for healthcare applicationsare produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® PP PCGR25 is a highly transparent polypropylene random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low melt temperature processability, enabling short cycle times. SABIC® PP PCGR25 results in good demoulding characteristics and has a good stiffness to impact ratio. Typical applications: SABIC® PP PCGR25 has been typically designed for injection moulding of housings for empty disposable 3-part syringes. Others applications demanding a high level of transparency and broad processing window are also possible. Compliance to regulations: SABIC® PP PCGR25 complies with the food contact regulations and the relevant monographs of theUS Pharmacopoeia. The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body. IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 40 g/10 min SABIC® PP grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® PP PCGR40 is a highly transparent polypropylene random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability and a very good organoleptic performance. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window, enabling short cycle times. SABIC® PP PCGR40 results in excellent demoulding characteristics and has a good stiffness to impact ratio. Typical applications: SABIC® PP PCGR40 is typically used for injection moulding of housings for empty disposable 3-part syringes. Other applications demanding a high level of transparency and broad processing window are also possible. Compliance to regulations: SABIC® PP PCGR40 complies with the food contact regulations and the relevant monographs of the US Pharmacopoeia. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 40 g/10 min SABIC® PP grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® PP PCGR40L is a highly transparent polypropylene random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability and a very good organoleptic performance. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window, enabling short cycle times. SABIC® PP PCGR40L results in excellent demoulding characteristics and has a good stiffness to impact ratio. Typical applications: SABIC® PP PCGR40L is typically used for injection moulding of housings for empty disposable 2-part syringes. A lubrication agent is added to reduce friction between moving parts. Other applications demanding a high level of transparency and friction optimization are also possible. Compliance to regulations: SABIC® PP PCGR40L complies with the food contact regulations and the relevant monographs of the US Pharmacopoeia. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 45 g/10 min SABIC® PP PCG grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® PP PCGR45 is a highly transparent polypropylene random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability and good organoleptic performance. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window, enabling short cycle times. SABIC® PP PCGR45 results in excellent demoulding characteristics and has a good stiffness to impact ratio. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 8.0 g/10 min SABIC® PP PHC26 combines very high impact resistance, also at low temperatures, with high stiffness and offers good flow properties. Thanks to the very low tendency to warp and the excellent surface quality, SABIC® PP PHC26 is typically used in injection moulding of suitcase shells, crates & boxes and automotive parts. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 14 g/10 min SABIC® PP PHC27 combines very high impact resistance, also at low temperatures, with a good stiffness and offers very good flow properties. Thanks to very low tendency to warp, it is typically used for injection moulding of crates & boxes, suitcase shells and automotive parts. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 20 g/10 min SABIC® PP PHC28 is the new development of SABICs very high impact PHC series. The grade combines very high impact resistance, also at low temperatures, with a good stiffness and offers very good flow properties. By its design it is offering potential of cycle time reduction, of down gauging and easiness of processing. PHC28 is typically used for injection moulding of applications requiring high impact from low to thick wall thickness such as suitcase shells, electronic equipment and automotive parts. SABIC® PP PHC28 is putting the combined stiffness and flow of very high impact copolymers to a next level. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 15 g/10 min SABIC® PP PHC31 combines high stiffness with good impact strength. Its excellent flow properties and narrow molecular weight distribution allows fast cycle-times and injection moulding of articles demanding low warpage and high dimensional stability. Typical applications are pails, containers, crates & boxes and automotive components. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com)IMDS ID: 80775790. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 15 g/10 min SABIC® PP PHC31-81 is a grade which combines high stiffness with good impact strength. Its excellent flow properties and narrow molecular weight distribution permits fast cycle-times and injection moulding of articles demanding low warpage and high dimensional stability. This grade is formulated with a combined processing and UV-stabilisation package. Typical applications are automotive components. It is also available in a general purpose additive package. SABIC® PP PHC31-81 is a designated automotive grade. IMDS ID: 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 10 g/10 min SABIC® PP QR6701K is specially developed for producing injection molded & ISBM articles with very high clarity at low processing temperatures. This grade contains advanced clarifier and anti-static agent. SABIC® PP QR6701K has the following features: Consistent processability; Good stiffness; Excellent clarity; Lower energy consumption and less cycle time due to low processing temperatures. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 45 g/10 min SABIC® PP QR6711K is a PP random grade with narrow molecular weight distribution intended specifically for producing injection molded articles with high clarity. This grade contains advanced clarifier & anti-static agent. SABIC® PP QR6711K has the following features: Consistent processability; Good stiffness; Exceptional clarity; Low thickness; Low warpage; Easy to flow; Better cycle time comparing to normal PP random copolymer grades; Less energy consumption. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 25 g/10 min SABIC® PP QR6731K is specially developed for producing injection molded & ISBM articles with very high clarity at low processing temperatures. This grade contains advance clarifier and anti-static agent. SABIC® PP QR6731K has following features: Consistent processability; Good stiffness; Exceptional clarity; Lower energy consumption and less cycle time due to low processing temperatures. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 25 g/10 min SABIC® PP QR673K is a highly transparent random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window. The SABIC® PP QR673K results in excellent demoulding characteristics and has a good stiffness to impact ratio.Application: SABIC® PP QR673K is mainly used in injection moulding processes. The SABIC® PP QR673K aims at transparent applications ranging from injection moulded housewares, office & home storage boxes, lids to caps & closures.Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThe product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 40 g/10 min SABIC® PP QR674K is a high melt flow index random copolymer with excellent transparency and good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability and a very good organoleptic performance. Part aesthetics are not affected by the lower processing temperatures, providing for a broader operating window. The SABIC®PP QR674K presents excellent flow behaviour, easy demoulding and good stiffness to impact ratio. Application: SABIC® PP QR674K is mainly used in injection moulding processes. The SABIC® PP QR674K aims at transparent applications were higher MFI’s with good flow are required. Its intended applications include injection moulded housewares, office & home storage boxes, thin wall packaging, lids and caps & closures. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 60 g/10 min SABIC® PP QR675K is a highly transparent random copolymer with good antistatic properties with excellent flow behaviour. This grade combines improved aesthetics of the finished articles with low temperature processability. Part aesthetics are not affected by the lower processing temperatures, providing for a broader operating window. The SABIC® PP QR675K results in excellent demoulding characteristics and has a good stiffness to impact ratio. Application: SABIC® PP QR675K is mainly used in injection moulding processes. The SABIC® PP QR675K aims at transparent applications were higher MFI’s with good flow are required. Its intended applications include injection moulded housewares, office & home storage boxes, thin wall packaging and media packaging. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 80 g/10 min SABIC® PP QR678K is a very high melt flow index random copolymer with high transparency and good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability. Part aesthetics are not affected by the lower processing temperatures, providing for a broader operating window. The SABIC® PP QR678K presents very high melt flow rate, easy demoulding and good stiffness to impact ratio. Application: SABIC® PP QR678K is mainly used in injection moulding processes. The SABIC® PP QR678K is typically used at transparent applications were higher MFI’s with good flow are required. Its intended applications include injection moulded housewares, office & home storage boxes, thin wall packaging and media packaging. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com.The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR(2.16 kg) 2.2 g/10 min SABIC® PP QR681K is a new highly transparent random copolymer grade in the blow moulding product range. Impact, transparency, stiffness are well balanced and give you the opportunity to make weight optimized blow moulding products. This grade combines improved aesthetics of the finished articles with low temperature processability. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window. High transparency, contact clarity and gloss will produce appealing blow moulded bottles. These properties, combined with a high heat deflection temperature, result in a wide variety of applications where the SABIC® PP QR681K can be used. Application: SABIC® PP QR681K is used for various blow moulding processes like Extrusion Blow Moulding and Injection (Stretch) Blow Moulding. SABIC® PP QR681K applications range from household to personal care products, but the material is also very suited for food packaging where a high heat distortion could be required. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 40 g/10 min SABIC® PP RA12MN40 is a random copolymer medium ethylene modified, clarified and anti-static. It is typically used for injection moulding applications. Special characteristics are high stiffness, good transparancy and high gloss. Typical applications are in housewares and thin walled packaging. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa

MFR (2.16 kg) 0.3 g/10 min This random copolymer has a high molecular weight and therefore mainly used for extrusion. It is typically used in sheet extrusion. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. IMDS 80775790 AmericasAsiaEuropeGreater ChinaMiddle East and Africa